If your moisture issues are more seasonal or confined to only some spaces of the rooms, a small portable dehumidifier is your best bet.
- This desiccant dehumidifier TOPZ (known also as absorption dehumidifier) bonds moisture with hydrophilic materials, silica beads. It can remove the dampness from small space and protect your clothing, accessories, food, documents and important equipments, cameras for example from damage.
- Through the transparent window on the top of the dehumidifier, the dehumidification status can be observed at any time. When the beads turn black, it means the dehumidifier is humidity-saturated. Then move it to the independent heating base, where it is "recharged" to drive off the humidity by heating. About 2 hours later, it is new and ready to go again!
The optimal relative humidity level is between 30 and 50 percent. If the humidity is higher than that, it can produce a musty smell, reduce your personal comfort, even trigger health problems.
Afloia safe dehumidifier can remove the dampness from small space and prevent the problems mentioned above. Protecting your clothing, accessories, food, documents and important equipments, cameras for example from damage.
Afloia lightweight and portable dehumidifier is the perfect size to keep the small area, such as drawer, closets, wardrobes, cabinets, gun safe, safe box, bookcase, storage boxes, reptile tank, trunk, luggage, which are in your home, bathroom, bedroom, kitchen, basement, garage, your office, your RV, car etc. free from excess moisture year round.
Silica Beads: Do They Really Work? Dehumidification Ability Explored
FAQs
To determine the status of the dehumidifier, observe the color of the indicator beads:
- Orange: Indicates that the dehumidifier is operational and can effectively perform dehumidification tasks.
- Dark Green: Indicates that the dehumidifier is at capacity and saturated with moisture. In this state, it cannot dehumidify and needs to be recharged by being heated and dried for 1-2 hours.
To recharge the dehumidifier and restore its functionality, follow these steps:
1. Place the Dehumidifier on the Heating Base: Simply set the dehumidifier onto the heating base. Ensure that it is correctly positioned to allow proper contact.
2. Plug in the Heating Base: Make sure the heating base is connected to a power source. This will enable the base to heat and dry the dehumidifier.
Once plugged in, the dehumidifier will begin to recharge. Allow it to heat for the recommended duration, typically 1-2 hours, until it's ready to use again.
No, the dehumidifier stick can be used directly without needing to be placed on the base. The base is only required for recharging the stick when the hygroscopic particles indicate saturation.